Micro-Loc LE Anchor Mount SRL
Leading Edge Personal SRDsThe Micro-Loc™ LE Anchor Mount Personal Self-Retracting Lifeline is a compact, lightweight Class 2 SRL designed to protect users working on Mobile Elevated Work Platforms (MEWPs), including aerial lifts, bucket trucks, and scissor lifts. Its anchor-mounted design takes the weight off the worker’s back to reduce fatigue, while the swiveling snap hook and anchorage loop enhanced mobility to maximize productivity. The high-capacity energy absorber lowers fall arrest forces for increased protection and versatility in a wide range of applications from overhead to foot level. Designed to keep workers safe and productive, the Micro-Loc™ LE Anchor Mount Personal SRL delivers the ultimate combination of protection and performance.
- Anchor mount device reduces weight on the worker and allows the device to stay anchored in place for next use
- Rated for leading edge, foot level tie-off and overhead applications for more versatility and protection in a wide range of work environments
- High-capacity energy absorber reduces maximum arresting force to less than 1,300 lbs. when anchored below the back D-ring or overhead
- FAILSAFE® Pawl technology provides reliable lock-up engagement minimizing fall arrest distances to keep workers safe and more confident on the job.
- High-strength alloy frame with durable thermoplastic housing and galvanized steel cable lifeline ensure long-lasting performance in harsh work environments.
Available Variations & Documents
- Warranty
- 1 Year Limited Commercial Warranty
- Leg Type
- Single
- Standards
- ANSI Z359.14-2021 Class 2, OSHA
- Color
- Orange
- Leading Edge
- Yes
- Rescue and Recover - SRL-R
- No
- Capacity (lb.)
- 310
- Capacity (kg.)
- 140
- Minimum Fall Clearance - Leading Edge application (ft.)
- 16.5
- Minimum Fall Clearance - Leading Edge applications (m)
- 5
- Minimum Fall Clearance - Non-Leading Edge application (ft.)
- 3.8
- Minimum Fall Clearance - Non-Leading Edge application (m)
- 1.2
- Minimum set back distance from edge - Leading Edge application (in.)
- 12
- Minimum set back distance from edge - Leading Edge application (cm)
- 30
- Maximum Total Arrest Distance - Non-Leading Edge application (in.)
- 25
- Maximum Total Arrest Distance (m)
- 0.6
- Average Arrest Force
- 1050
- Housing Material
- Reinforced Nylon
- Anchor Hook Material
- Steel
- Lifeline Material
- Galvanized Steel
- Special Features
- Leading Edge
- Body Hook Type
- Snap Hook
- Anchor Hook Type
- Carabiner
- Webbing/Cable Thickness (in.)
- 0.18
- Webbing/Cable Thickness (mm.)
- 4.7
- Length (m.)
- 2.7
- Length (ft.)
- 9
- Gate Opening (in.)
- 1
- Gate Opening (mm.)
- 25.4
Frequently Asked Questions
No, Fall Safe doesn't recommend it. With a D-ring extender, the SRL's energy absorber sits away from the worker's back, where it can strike the edge in a fall and may cause the lifeline to separate. Connect leading-edge SRLs directly to the dorsal D-ring as shown in the user instructions. See the Fall Safe technical bulletin on D-ring extenders for details.
Yes, but only an ANSI Z359.14 Class 2 personal SRL. Class 1 SRLs aren't approved for use in a MEWP, because they're designed for anchorage at or above the dorsal D-ring. When the MEWP is traveling or being repositioned, Fall Safe recommends a restraint lanyard, such as part 717505, instead.
Yes. Fall Safe SRLs are tested to ANSI Z359.14 requirements, which cover performance at temperatures from -40°F to 130°F. In freezing conditions, check the lifeline and housing for ice before each use, since ice can affect retraction and locking.
The Micro-Loc and Skyloc II ANSI Z359.14 Class 1 models are rated for a maximum capacity of 400 lb, including the worker's clothing, tools and equipment. Most fall protection equipment is rated for 130 to 310 lb, so check that every part of the system, including the harness, anchorage connector and anchorage, is also rated for the heavier load.
It depends on where the device is anchored and how far the worker moves from it. As a guide, Fall Safe Class 2 leading-edge devices need as little as 4 ft of clearance when anchored overhead, about 11 ft when anchored at foot level with no swing, and up to about 20 ft when the worker is offset to the side and a swing fall is possible. Calculate clearance before starting work, set up the anchorage to minimize swing falls, and use the clearance chart in each product's user instructions.
The Skyloc II is a self-retracting lifeline for fall arrest when working at height. It's lightweight and portable, so it's easy to move between jobs and work areas. A leading-edge version (Skyloc II LE) is available for work near unprotected edges.
The Skyloc II is used in construction, maintenance and other industries where workers need fall arrest at height. The leading-edge version (Skyloc II LE) is designed for work near unprotected edges. Check each model's ANSI class before use: Class 1 for anchorage at or above the dorsal D-ring, Class 2 for leading edges and anchorage below it.
Skyloc II Class 2 models use a 7/32 in galvanized steel cable lifeline, and Class 1 models use 3/16 in galvanized steel cable. Some configurations, such as the Wildcat, use stainless steel cable or Dyneema rope instead. Check each model's specifications for its lifeline type.
The FT-R's swiveling anchor and leg-end connectors make the device easier to install and keep the lifeline from twisting as the worker moves.
The Skyloc II meets OSHA 29 CFR 1926.502 (construction) and 1910.140 (general industry) and ANSI/ASSP Z359.14-2021. See each model's label and Declaration of Conformity for its ANSI class.
)
Unsure what gear is right for your needs?
Our experienced team of Fall Safety experts can help.