MicroLoc LE SRL
The Micro-Loc® LE is a class 2, Leading Edge SRL that also meets the requirements of Class 1. This means workers and companies can stay compliant and safe across a changing jobsite and meet OSHA 1910’s 4-foot trigger height regulation, while maintaining the protection and versatility of foot-level tie-off.
Leading Edge Protection
Meet the Micro-Loc™ LE Personal Self-Retracting Lanyard from Fall Safe™ engineered with a single goal: protecting you where it matters most – the edge. It’s designed to keep workers protected against leading edges, while maintaining shorter arrest distances, industry-leading energy capacity, and durability that thrives in the harshest job site conditions, all without slowing workers down or adding unnecessary weight.Meet the Micro-Loc™ LE Personal Self-Retracting Lanyard from Fall Safe™ engineered with a single goal: protecting you where it matters most – the edge. It’s designed to keep workers protected against leading edges, while maintaining shorter arrest distances, industry-leading energy capacity, and durability that thrives in the harshest job site conditions, all without slowing workers down or adding unnecessary weight.
)
Related Products
Micro-Locâ„¢ LE, Single, Cable, Snap Hook
Micro-Locâ„¢ LE, Single, Cable, Swivel Snap Hook
Micro-Locâ„¢ LE, Tie-Back, Single, Cable
Micro-Locâ„¢ LE, Tie-Back, Twin, Web
Micro-Locâ„¢ LE, Twin, Cable
Micro-Locâ„¢ LE, Twin, Cable, Rebar Hook
Micro-Locâ„¢ LE, Twin, Cable, Snap Hook
Micro-Locâ„¢ LE, Twin, Cable, Swivel Snap Hook
Frequently Asked Questions
Use an ANSI Z359.14 Class 2 personal SRL (PSRL). In a MEWP, the anchorage point is often at or below the worker's D-ring, and Class 2 devices are tested for that. The Micro-Loc LE (4280008-4) is one option. Always follow the MEWP manufacturer's guidance on approved anchor points.
The Micro-Loc LE is used in construction, maintenance and other industries where workers face unprotected edges. It meets ANSI Z359.14 Class 2 leading-edge requirements, can be anchored below the dorsal D-ring and needs as little as 4 ft of clearance when anchored overhead. That suits general-industry sites, where OSHA's fall protection trigger height is 4 ft.
The Micro-Loc LE meets OSHA 29 CFR 1926.502 (construction) and 1910.140 (general industry) and ANSI/ASSP Z359.14-2021 Class 2, which includes leading-edge testing. See the product label and Declaration of Conformity for details.
Yes. The Micro-Loc LE is certified to ANSI Z359.14-2021 Class 2, which means it has passed testing over a sharp edge, among other requirements. Follow the user instructions for edge conditions, setback distance and swing-fall limits.
Tie-off points often change over the course of a project: above the shoulders, below them and at foot level. It's best to anchor as high as possible, but that isn't always an option. Many SRLs are built mainly for one situation: Class 1 for overhead anchorage, or Class 2 for leading edges and lower anchorage. The Micro-Loc LE is designed to cover more of those situations, with leading-edge protection, a low maximum arrest force, as little as 4 ft of clearance when anchored overhead and low clearance at foot level.